🔥 Free Monthly Webinars (30 minutes): Check out the schedule! Extremely Popular (Don't miss out) 🔥Learn More

Bushfire Water Spray Maintenance

Firewize helps commercial building owners and managers to inspect and test bushfire water spray systems. Australian Standard AS 5414 provides a framework for the design, component selection and installation of bushfire water spray fire protection systems to help protect property from ember attack and low level radiant heat flux for certain building classifications. The Standard along with AS 1851 provides some guidance in respect to periodic inspections and maintenance to ensure these systems are working properly.

CEO, Firewize
06 Oct, 2026
Bushfire Water Spray Fire Sprinkler System Activated

A bushfire water spray system can be manually operated, automatically operated or remotely operated to help protect property from ember attack and low level radiant heat flux.

These systems can be used to protect buildings, structures and equipment that may not be specifically covered in the National Construction Code or building legislation. It should be noted that AS 5414 is designed to compliment relevant legislation, National Construction Code requirements as well as Australian Standard AS 3959 that covers the construction of building in bushfire-prone areas.

To ensure these systems are working properly, Firewize has developed a periodic inspection regime for commercial buildings and structures that draws on elements from both Australian Standard AS 5414— Bushfire water spray systems and AS 1851 — routine servicing of fire protection systems and equipment.

These systems are common for protecting remote buildings such as homes & homesteads, equipment or machinery sheds, shearing sheds, timber mills, cabins, water treatment facilities, telephone exchanges, power substations, weather monitoring and ranger stations, outdoor education buildings and the like.

Commercial Properties: Bushfire Water Spray Maintenance

Get a quotation for your bushfire water spray fire sprinkler system for your commercial building or structure.

Name
Service delivery across Melbourne:

Select each area that applies.


Timeline for action!

For commercial property owners, Firewize offers a periodic (six-monthly) inspection to ensure bushfire water spray systems are working as intended.

We recommend that they should be inspected and tested no less than two times per year. We recommend September and March ahead of the annual fire season and at the end of summer each year.

After each inspection and test has been completed, we prepare a summary report of our findings, along with any applicable recommendations.

An inspection of the water spray system should also include an inspection of risks that could contribute to the promulgation of fire including ember attack or radiant heat from adjacent fuel sources.

Our inspection checklist covers the following 6 principles;

  1. The bushfire water spray system has no inherent defects or obvious failure points;
  2. The system has an adequate water supply (including tanks) and ensure the pressure and flow rate of the water supply is adequate for the required duration.
  3. Where a pump is used, ensure it has been serviced, operates correctly and has enough fuel for the expected operation time.
  4. For electric pumps, that the power source is protected from fire.
  5. The system operates as intended (functional test), including manual, automatic or remote operation.
  6. There is a buffer zone around the building or structure. Ensure maintenance has been performed such as clearing of gutters, gardens and surrounding areas, and the protection of openings.

Homeowners

I am a home owner and would like a copy of the bushfire water spray inspection checklist.

Name
Service delivery across Melbourne:

Select each area that applies.


Timeline for action!

While Firewize helps commercial building owners, we have also developed a version of our maintenance inspection checklist for homeowners. You can request a copy of our free self-assessment checklist by filling in the form (for home owners) on this webpage. The checklist that will help guide you through a process of inspection to help ensure your system is working correctly.

We do not design water spray systems for homeowners, rather we point people to the National Construction Code relevant Australian Standard AS 5414— Bushfire water spray systems, industry bodies such as Fire Protection Association Australia and Housing Industry Association. This Standard along with advice from regulators, fire authorities and the CSIRO recommend the following guiding principles;

  • Consider the installation of a bushfire water spray system (AS 5414) to protect the building façade (including walls, eaves, and rooftops) and any vegetation and fine debris in the immediate vicinity of the home.
    • Ideally use a reliable water source that can provide water pressure and flow passively (i.e. using gravity).
    • When designing your system, make sure to use metal pipework and sprinkler heads and fixings that are manufactured using non-combustible materials.
    • Consider using additional sprinkler heads in the roof cavity, and underfloor spaces – especially if they contain or are composed of combustible materials.
    • Consider using a system which can activate automatically. Don’t rely on someone being at home.
  • Think of the system as an an additional redundant measure (or as a last line of defence), rather than as your primary means of protection.
  • Use non-combustible shutters that offer protection against flame contact, embers, and strikes from flying objects.

We can also help you with information about other home fire safety equipment such as portable fire extinguishers and fire blankets.

Portable Fire Extinguishers for Homes

    👋🏼 Howdy, got a suggestion? Please complete this 30 second survey to let us know what you think of our website.